HELP DJ SCAN 250 PROBLEM..

Status
Not open for further replies.

unlimitedsounds

Active Member
I hope someone can help.. I have 2 DJ SCAN 250's.. One of them has a bulb burn out so I replaced the blub. Now when I try to use the light, the new bulb never lights. I have tried 2 different bulbs and also the other bulb from the working DJ Scan 250 light (I also tried the new bulbs in the working 250).. any ideas what I can do to get it working??

Thanks..
 

*Dan Leithem

New Member
you might need to replace the ceramic "thingy" that the bulb goes into

I had this same problem when i owned DJ Scans, these things eventually wear out
 

BillESC

Member
Unlimited,

If, reading your post correctly, you've tried a known working bulb in the offending fixture and it fails to light, there is one of two things wrong.

The socket is bad or the wired from the socket to the power source have an open to them.

Does the fan work in the bad unit? Have you checked the fuse?
 

DJ TimM

New Member
I had to replace the ceramic socket on one of mine too......it's a pain in the A$$......mine arrived DOA and ADJ sent a replacement.
 

AES

New Member
speaking of the dj scan 250, I accidentally dropped one, packing up after a gig. the mirror and moving head broke and I was wondering if anybody knew of a lighting repair dealer in Northern NJ. I just got this light in 3/2004 and don't wanna junk it right away!
 
Status
Not open for further replies.
Top